Furry drawing tips

Furry drawing tips DEFAULT

Drawing Anthropomorphic Animals


Anthropomorphic animals are animals with human-like characteristics. They're commonly referred to as "furries" or "kemono." The genre has been gaining a rapid increase of attention in recent years, and is often found in movies, anime, cartoons, and writing. The ability to draw these creatures can increase an artist's versatility for character creation in their works. Fantasy based settings tend to especially make use of this, with species such as "Beast men" being a common trope. 

The wide range of animals to choose from when designing your anthro gives birth to vast possibilities for the character's structure and build. Be sure to research real life species first to examine their body shape and features. Picking out clothing and even hairstyles which may reflect on the human cultures found in the geography that the animals live in can be a fun bonus. 

In this guide, I'll be sharing with you some tutorials I've made which provide useful tips and tricks when drawing furries. Most of these tutorials can also be applied to feral structured animal art, in the event that you're not too fond of their anthro counterpart. 

Anthro Legs

Unlike humans who have one pivot point, animals have two, resulting in a different anatomical structure. Depending on how animal-like you want your furry to be, this can be useful in adding an additional element of realism to their character. Also, don't forget! The body is a three dimensional form. Be sure to incorporate a sense of depth, rather than a flat figure.

Different species will have varying thickness of legs and body. For example, heavy draft horses or elephants have a sturdy build, while coyotes or deer have slim, agile legs. Keep in mind how muscular your character and species is, as the legs are a great opportunity for showing personality and style.

Fluid, rounded shapes are most common in real animals. Combine circles, ovals, and curves to achieve an appealing form. If you’re going for a more stylistic appearance, however, the sky’s the limit.

Anthro Hands

Anthropomorphic hands can range drastically in style and be either significantly different from human hands, or quite similar. For this tutorial I’ve gone with a more human-like example, featuring enlarged finger tips to allow for paw pads.

If you’re feeling lost on how to stylize your own anthro hands, try looking up photographs of hands belonging to primates as they’re different from slender human fingers and can feature odd shapes.

> Step One :: Start simple. Break down your hand into a rounded square and a line for where the center of the wrist will be.


> Step Two :: Add a box for where the thumb will go and sketch the rough layout of the fingers. Note that fingers don’t all have the same height, so angling your box for where they’ll go can provide you with a visual reminder to give them height variety.
I’ve also made four circles at the base on my fingers box, to indicate where each finger will sprout from.


> Step Three :: Starting from the base of each finger circle and drawing up to the top of the finger box, I make the individual fingers.

> Step Four :: Draw ovals and circles for the paw pads. Connect the wrist to the hand, following the same curve as the center wrist line that we drew in Step One.


> Step Five :: Get sketching to further flesh out your hand shape and add details. I’ve also incorporated small claws.


> Step Six :: Finish off your sketch with a clean layer of lineart, coloring, shading, and highlights. Don’t forget that this is a three dimensional form, so rounded shadows and highlights can assist in this visually.

Drawing a Canine Head

Dogs are one of the most popular species of anthropomorphic animals, so I’ll be doing a step by step tutorial on how to draw a doberman’s head. This same method can be applied to most any canine, or even most species with some minor adjustments such as muzzle length. While drawing the head, consider all parts moving with some degree of connection amongst themselves.

> Step One :: Start with a circle. Then, from the edge of a circle, add a rounded box shape. This box will later be your muzzle, so pay attention to its length to insure it isn’t too long or too short for your species. As always, referencing real life photos of animals can significantly aid you in getting proper proportions.

> Step Two :: Adding the eyes and nose. Think of the eyes as boxes, with triangles added to each end. You can achieve various expressions depending on how you angle the eyes, but for this tutorial we’ll be going with a sly, casual expression. For this I have the eyes angled upwards. The nose then gets added to the end of the muzzle, with a curve.


> Step Three :: The cheeks connect from the ends of each eye, to the muzzle in one circular motion. It may help to draw a circle first there, to better envision the space. Once again, the head is three dimensional, so don’t make those cheeks too flat or straight!
The eyebrows get added in on top of each eyelid by drawing a “Ying-Yang half” connected to the eyelid.
After that is adding your mouth. Start right before your middle box line starts to curve upwards, and end the mouth about where the pupil of the eye will be to achieve a smile. Curves are your best friend!

> Step Four :: Time to add the ears! Think of a three dimensional cone shape, and add it to each side of the head. A helpful tip is that both ears will be about the same height, even though one is going on the other side of quarter view head. You can check to make sure they’re the same height to grabbing your ruler tool (CTRL+R) and moving the top ruler down to measure.

> Step Five :: Adding the neck is easier when you think of it like a diamond shape or square. Connect that square shape with a curve that comes down from the back of the head, and makes another square. Sort of like two squares overlapping each other.


> Step Six :: Time to define the collar bone and chest dimensions! Make another diamond/square just below the middle of your first. Then draw a line to connect the two at the bottom.

> Step Seven :: We’re almost done with the sketch, just got to clean it up by erasing any extra lines.


> Step Eight :: The sketch is done! Round out of the edges of it so it flows smoothly, and tidy things up with some clean lineart.

A tip for doing lineart on top of your sketch is to turn on Layer Color for your sketch found under the “Effect” tab on your right side panel. Make a new layer. Then do your clean lineart on top in black. The sketch being in a different color makes it easier to see your final lineart.
Once the clean lines are done, just turn off your sketch layer and wow! You’re left with pretty final line work.

I use the G-Pen with stabilization and pen pressure turned on for easy control of line width and smooth lines.

Consider what colors your character or animal species has before you begin the coloring process and make a color pallet. Dobermans have a variety of different coat colors to choose from, above I’ve made very basic color pallets for three different varieties.
I made these color pallets by pulling up real life photos of the dog breed and using my Color Selector tool to grab colors directly from the dogs.

Having easy access to your references and color pallets for quick visibility, without hindering your drawing process or cluttering your screen, is vital for a smooth work flow. To do this I open my references and color pallets in a new tab, drag the tab down onto my main canvas, resize the tab, and move it to an easy to see spot on the screen. You can even do this for multiple tabs at a time.

> Step Nine :: Coloring. To get an instant base layer of color under your lineart, set your lineart layer as “Reference Layer” by clicking the lighthouse looking icon above your layer menu. Make a new layer for color below it. Select your Magic Wand tool now, and click anywhere outside of your lineart. Inverse this selection on the small popup panel, and then select “Fill.”
Want to quickly color a sketch, or lineart which contains gaps? Just enable “Close Gap” on your Selection Wand and adjust that setting for how large your gaps are.

> Step Nine Continued :: With the base layer of color done, go in and color the additional fur patterns. If your lineart layer is set to “Reference Layer” as described in the above tip, coloring in lineart is quick and easy regardless of what layer you’re on.

> Step Ten :: Set your shadow layer to “Multiply.” Clip this layer to your base color layer. When painting shadows, be sure to keep in mind where your light source is located. I prefer to use watercolor styled brushes for this step, as it gives a fur-like effect with minimum effort. Dobermans have very short, glossy fur, so it’s not necessary to go into excess detail painting fur for this breed.

The color of shadow you use can vary depending on the surrounding light or scene. For this simple headshot, however, I’ve just used a basic blue to stand out against the dark grey of the coat color.

> Step Eleven :: Set new highlight layer to “Overlay.” Clip this layer to your base color layer. With the same watercolor based brush I used for painting shadows, I now go in and paint the basic highlights using a warm gold color.

> Step Twelve :: Time to add gloss! Cyan or light yellow tends to work best for bright pops of color. I prefer to avoid using solid white, as it doesn’t provide enough depth.
This is the brush I use for most all of my gloss effects;


> Step Thirteen :: This step is optional but helps to add appeal and depth to the character.
For the final touches, I like to take my “Gradient Tool” set on “Background to Transparent” mode and in a new layer set to “Linear light” do additional lighting. Be sure to clip this new additional lighting layer to your base color layer. Do one gradient stroke with a warm color from the top where your light source is coming from, and one stroke in a different, ambient lightning coloring, from the bottom.

Painting Fur

When drawing nearly any mammal, chances are you’ll need to create some degree of fur. For this next tutorial, I’ll be sharing my step by step guide on how to do this. As always, be sure to pull up a reference photograph of whatever your animal is so you can gauge the density, color, pattern, length, and straightness of their fur. Some species will have very wavy fur while others will have a more straight and slick appearance.

> Step One :: Start with a sketch. For this tutorial, I’ll be painting the fur for a canine tail. As I’ll be painting the fur rather than cell shading, the sketch can be rough since it’ll simply get painted over in the end.


> Step Two , Three , Four , and Five :: As we did with the Doberman Head tutorial in step nine, it’s time to lay out the base colors of our tail.
Set your sketch layer as “Reference Layer” by clicking the lighthouse looking icon above your layer menu. Make a new layer for color below it. Select your “Magic Wand” tool, make sure that “Fill Gap” is enabled if you have a rough sketch like I do with lots of gaps in it. Click anywhere on the canvas outside of your lineart, inverse that selection, and then fill.

> Step Six :: It’s now time to establish base shading and highlights! Make a new layer and clip it to your tail base coloring below.

> Step Seven :: Grab any watercolor brush tool. For all tutorials in this guide, I use the “Transparent Watercolor” brush which is found already in Clip Studio. I adjust the settings on it as needed, but start primarily with the ones seen in the image above. (The brush size should be adjusted depending on how large your canvas is and what you’re painting.)


> Step Eight :: I get to work painting both the general highlights and shadows. Notice how the brush gives a textured, fur-like effect, rather than being a completely smooth surface.

> Step Nine :: Begin adding shadows for where general fur strands will fall. Understand that fur has specific directions that it falls in, which vary depending on the individual body parts on the animal. For the tail, the fur generally goes in a downwards direction. Longer fur has more room for curves, while shorter fur will often be straighter.


> Step Ten :: Using a lighter color, define the fur strands further by going over top of the shadows with your highlights. The highlighted potion will be found on the edges of the individual fur strands, the base of the fur strands should get darker as it blends in.

> Step Eleven :: Make your watercolor brush smaller and begin touching up the fur more by defining the edges of strands with your shadows and highlights. I suggest using your Color Picker tool to easily grab colors currently present. Darken shadows if needed.

You can finish with Step Eleven if you want more realistic fur, or go onto Step Twelve for more vibrant semi-realism often seen in anime-style anthros.


> Step Twelve :: Adding gloss. Using a light cyan color to contrast against the brown fur, I use this brush again (as seen in step Twelve of the doberman tutorial) to make the figure pop out by adding glossy effects.


> Step Thirteen through Fourteen :: Make three new layers. Clip new layers to your painted fur layer, and set two of the new layers to “Overlay” and one of the new layers to “Multiply.”

> Step Fourteen through Fifteen :: Using a cyan color, I go in with a smooth rounded brush and add additional lighting effects to the top of the fur on my new highlights Overlay layer. I also go in with a light red brush color and add rim lights to the bottom of the fur on my second new Overlay layer.
On my multiply layer, I select a muted redish color and bring out some of those shadows where needed.

Once this step is done, your fur is complete!


Thank you all for reading, and I hope you picked up some tips, tricks, and ideas to incorporate into your own work!

Users who liked this post

Sours: https://tips.clip-studio.com/en-us/articles/2393


Anthro Week
Hello! I'm Illusir and I'm a hobbyist anthro artist. I'm here today to show you how I create my art which often involves a lot of sepia tone and mysterious characters :dummy:
I hope you'll find this article helpful! So, let us begin with...  
Step 0. Prologue
Before we start it's worth to mention that:
I use Photoshop CC for creating artworks, so all the filters and commands are for this program.I usually draw my art on bigger canvases (usually I use the size about 3000x3000px) and then reduce the image size. This method allows you to add small details to your artwork more conveniently. For example, the image in this tutorial is 680px wide, although I worked with 3000x3000px file.
Now let's move to the actual drawing process!
Step 1. Quick Sketch
Create a quick sketch to catch the main idea of your drawing. You can create multiple sketches and pick one you like the most. For a dark mysterious topic The Time always fits quite nicely, so
Sours: https://www.deviantart.com/drawing-tutorial/gallery/50920694/tutorial-character-anthro-furry-and-more
  1. Pontoon splash fins
  2. Mario odyssey peach castle moons
  3. Prevost air hose
  4. Ebay ac vacuum pump
  5. Atonement synonyms

Guide to Drawing Furry Faces 2.0

I thought this would take me only a couple hours... it turned into taking up the entire day :faint:

ANYWAY!! So I finally got this project off my chest lol, I've been DYING to remake my furry faces tutorial since I've had many many people come tell me that my last guide was very useful to them... and it's been driving me nuts because it was so badly done, I HAD to remake it!!
( for those of you who don't know what I'm talking about, you can see the tutorial on my old account here -> Guide to Furry Faces 
Eventually I'll remove it, but for now it'll stay up for those who still want to use it xP
the first person to correctly comment how many paw prints are in this tutorial gets a free sketch claimed! 8D

As stated in my deviation, this is for beginning artists!!! I really tried to add some better examples of how to go about drawing them... and I really hope I did an okay job with it, and I especially hope somebody out there finds it helpful one way or another!!
I'm sure I'll be making a couple edits over time too... but for now... I hope this helps! Also want to say, YES, you can reference the art in this specific tutorial as much as you need to help you learn!! However if you upload anything that is heavily referenced, please give me credit! ^^ 
Thank you all for the support :heart:

Here are some other tutorials that might be helpful and good for your art journey!!!
Basic Tutorial by AkuvaCuddles' Expression Tutorial/Ramblings by CuddlesAndHugglesAnthro Expressions by shesta713Ears by M-Skirvin

Image details

Image size

1088x7168px 2.52 MB

© 2017 - 2021 Snorechu

Sours: https://www.deviantart.com/snorechu/art/Guide-to-Drawing-Furry-Faces-2-0-699404860
I learn how to draw Furries for 30 days


Tips furry drawing


How to draw furries for beginners: The secret to drawing PERFECT paws!


You will also like:


505 506 507 508 509