Webex directory connector

Webex directory connector DEFAULT

cisco directory connector latest version

Any room objects flagged for deletion are under Rooms Deleted. IP Address. Active Directory and Control Hub. If you integrated Single Sign-On (SSO) with your Cisco Webex organization, you can also suppress these automatic email notifications if you prefer to contact your users directly. on the internet. Proceed with copying the downloaded files to your domain controller. This is an app for enterprise users who need a secure way to connect to a VPN at their place of work. and apply the changes. Click Customize if you want to set up additional attributes to identify user data as room data. Think of the drop-down attributes as presets. up as searchable entries on cloud-registered room devices, such as a Cisco Webex Room Device or Cisco Webex Board. With this setting, you can customize To add new application, click New application button on the top of dialog. If prompted, sign in in with your proxy authentication credentials, and then sign in to Cisco Webex using your admin account and click Next. You Follow these steps to provision Active Directory users and create corresponding user accounts in Control Hub. A dry run allows you to see what objects will be added, modified, or deleted before you run a full or incremental We document new functionality, bug fixes, and general improvements. If there are still mismatched Concatenates input strings or expressions. user data: (Optional) Choose mappings for mobile and telephoneNumber if you want mobile and work numbers to appear, for example, in the user's contact card in Webex Teams. For more The Room, Desk, or Board device is dialed directly Cisco Directory Connector verifies the attribute value of uid in the identity service and retrieves 3 available users under The phone number data appears in Webex Teams when a user hovers over another user's profile picture: For more information on calling from a user's contact card, see Calling in Webex Teams (Unified CM) Deployment Guide (admins). After you synchronize the room information, the on-premises room devices with a configured, mapped SIP address show For any changes that you make to users in Active Directory (for example, display name), Cisco Webex Control Hub reflects the change immediately when you refresh the user view, but the Cisco Webex Teams app reflects the changes 72 hours from when you perform the synchronization. If you store user information within LDAP directories in your network infrastructure — for the purposes of this document, in Microsoft Azure Active Directory Domain Service — you can configure the appliance to query your LDAP servers to accept, route, and . 8. If the results are expected, go to Actions > Synchronization mode > Enable Synchronization, and then click Enable Now to do a manual synchronization and put Cisco Directory Connector in manual mode at this point. 3) Install Cisco VPN client 5..03.0530 using compat. Many organizations want to leverage Windows Autopilot to provision new devices into their existing Active Directory environments. We concluded with reports that correctly display IP addresses from our internal network. The account used to run Enable Smart Net Total Care resources to more easily manage your Cisco products and support agreements. You must set up an auto-assign license template before you use it on new Cisco Webex Teams users that you synchronized from Active Directory. you can add an expression that creates a customized attribute based on the employee title, given name, and surname in Active For any mismatched user objects that you retained, you must add them to Active Directory so there's an exact match between If you were provisioned a Cloud Room Connector (CRC) license, prior to January 18, 2021, please use our Room Management instructions for the standard API Room Connector. (You can do your own email campaign.). If you have multiple domains, do this step on any other Cisco Directory Connector that you've installed. Identify and manage IOS security risks using National Vulnerability Database CVE integration. Among the users in the cloud, some might match on-premises Active Directory object and be assigned licenses for services. A . See the Deployment Guide for Hybrid Data Security for guidance. You can select individual or parent containers to use for synchronization. MS SQL Database on the Cisco side. Support for sending login events (AD user-IP mappings) to Virtual Appliances on port 443 over HTTPS. ISE node must be added to domain as a host (computer) ISE node need privileges to read LDAP / AD directory (needed for authentication) Need to have user with privileges to add machined to domain, there are specific cases when ISE node is added to AD Offline. Utilize logs in /var/log/cisco and tools in /opt/cisco/amp/bin to help . In the Confirm Dry Run prompt, click Yes to redo the dry run synchronization and view the dashboard to see the results. It enables Microsoft Active Directory integration with Cisco Collaboration Cloud. thanks. When you assign a license to a Cisco Webex Teams user, that user receives an email confirming the assignment, by default. In the Object Type section, check Users, and consider limiting the number of searchable containers for users. So my Cisco Directory Connector tells me this "A newer version is available. Enter the following: Remote Gateway. This worked well when i upgraded to 3.3, then the auto update to 3.4 went normal. Umbrella AD Connectors deployed on Windows Server 2019, Windows Server 2016, Windows Server 2012 R2 and Windows Server 2012 will now use TLS 1.2 with strong ciphers by default when syncing with Umbrella. *—The at-symbol, followed by any character, repeating zero or more times. This README explains how to install the Cisco Secure Dynamic Attributes Connector. But i didn't think it would invite everybody from the AD. Let's look at each part of the avatar URI pattern and what they mean: . You can synchronize your users' directory avatars to the cloud so that each avatar appears when they sign in to the Cisco Webex Teams app. For example, the summary might include the following: This attribute is used for user synchronization. A collection of utilities for interacting with Cisco VIRL 1.x or Cisco Modeling Labs (CML) v2.0+. A vulnerability in the search path processing of Cisco Directory Connector could allow an authenticated, local attacker to load a binary of their choosing. This version is identical to version 1.5.1 and is being released only to force a synchronization of AD objects for these customers. Choose one, depending on the number of Active Directory domains you want to bind to Directory Connector: Because the existing source type is AD DS, you cannot select AD LDS for the new binding. After you complete a full user synchronization from Cisco Directory Connector in to Cisco Webex Control Hub, you can assign the same Cisco Webex service licenses to all of your users at once or add additional licenses to new users if you already configured an auto-assigned Cisco Directory Connector synchronizes the user account state—In Active Directory, any users that are marked as disabled also appear as inactive in Assigning users to Cisco Webex. - Integrating Umbrella DNS connector code into the Cisco IOS-XE platform for transparent DNS interception on routers, switches, and wireless controllers Show more Show less Senior Product Manager Displays the synchronization schedule for incremental and full synchronization. Check that the objects you want to add for this configuration, and click Select. Check Enable notification if you want to override the default notification behavior and add one or more email recipients. Now that you've done these steps, when you do a search on a Webex cloud-registered device, you'll see the synchronized room Removes all characters from the beginning of the string to the position of the character or string argument, if matched. (Synchronized items appear under Cloud Statistics.). The administrator needs to configure AD to point to Cisco Spark Cloud B . To receive this upgrade, ensure that your firewall is configured to enable access to disthost . versions 2012 R2 and 2016. Blast Dial Feature for Spaces on Cisco Meeting Server 3.2. SailPoint's Cisco Umbrella connector offers deep access governance for Cisco Umbrella. domain. In the Name textbox, type the attribute name shown for that row.. c. Leave the Namespace blank.. d. Select Source as Attribute.. e. From the Source attribute list, type the attribute value shown for that row.. f. Click Ok. g. Click Save.. On the Set up Single Sign-On with SAML page, In the SAML Signing Certificate section, click . on-premises and the cloud. Cisco VPN client installed smoothly and so did Citrix XenApp. This attribute specifies the user's office location. This attribute sets the user's preferred language and the following formats are supported: xx_YY or xx-YY. After BasS - Monday, August 10, 2009 6:52:20 AM; I'm one the lucky ones having Windows 7 Ultimate RTM. Results. Click To See Full Image. This attribute specifies the user's primary (work) phone number that is used for calling the user from the contact card. From Cisco Directory Connector, go to Configuration, and then click Object Selection. I need the new features, in the newer version. After you sign in, you're prompted to perform a dry run synchronization. By default, Cisco Directory Connector synchronizes all users that are not computers and all groups that are not critical system objects for a domain. After the URI information is verified and looks correct, click Apply. the call will ring indefinitely at this time. the Cisco Directory Connector Dry Run Reports to verify that all expected users are present before you fully synchronize to the cloud. So my Cisco Directory Connector tells me this "A newer version is Configure 2FA/MFA for End-Users. Related Posts. For more information about user statuses, see User Statuses and Actions in Cisco Webex Control Hub. to the cloud. 6. The URI pattern and variable value in this procedure are examples. The new version of Cisco AnyConnect Secure Mobility Client empowers your employs to work from any part of the world, on any computer or personal device they have. drop-downs and determine which on-premises attribute synchronizes to which cloud attribute. However, you must make sure that the PDF - Complete Book (6.04 MB) View with Adobe Reader on a variety of devices. If you choose to have the preferred language come from your Active Directory, then Active Directory is the single source of Read about the latest software releases for Cisco Directory Connector. Manually start an incremental synchronization (disabled when you pause or disable synchronization, if a full synchronization Evaluates the separated expressions against the empty string, and selects the first non-empty result. Note: Starting January 18, 2021, new accounts provisioned with Cloud Room Connector licenses will automatically have access to the new enhanced API Room Connector for SIP/H.323 devices. Active Directory diagnostics (1.3+) In ISE 1.3, the Active Directory connector was replaced with one that could support Multi-Forest, Multi-Join, domain white lists, and much more. By default, the organization contacts or administrators always receive email notifications. A vulnerability in the search path processing of Cisco Directory Connector could allow an authenticated, local attacker to load a binary of their choosing. This attribute is used for the user's manager name that appears in the contact card and people insights. The minimum recommended Authentication Proxy version for Active Directory synchronization is 2.6.0, but we always recommend installing or updating to the latest version. Cisco Directory Connector. Version 5.4 Secure Endpoint Release Notes 9 21 June 2021 21 June 2021 Secure Endpoint Mac Connector 1.15.5 Bugfixes/Enhancements • Fixed an issue that can cause a high number of disk writes when scanning. synchronization and commit the changes to the cloud. For example, A vulnerability in the file type detection mechanism of the Cisco Advanced Malware Protection (AMP) for Endpoints macOS Connector could allow an unauthenticated, remote attacker to bypass malware detection. Later, if you want to change the displayName, you can enter a new attribute expression. On Thursday, September 30, 2021, Cisco Umbrella will release version 1.8.0 of the Active Directory Connector (the Windows Service component) and a new version of the Domain Controller configuration script to the final wave of the production track. If emails aren't suppressed, the new users receive an activation email when you assign services to users by you can assign that to the newly synchronized users. Choose "Install" to install the connector. They are usually only set in response to actions made by you which amount to a request for services, such as setting your privacy preferences, logging in or filling in forms. You may already have some Cisco Webex Teams users in Control Hub before you used Cisco Directory Connector. If the license template has already been configured and activated. When you enable synchronization, Cisco Directory Connector asks you to perform a dry run first. You do so from Actions > Sync Now > Full, and then users from the current domain are synchronized. Join data from different data sources, like SQL Server and Oracle. From the customer view in https://admin.webex.com, go to Users, click Manage Users, choose Modify all synchronized users, and then click Next. completion. It's more advanced than CCENT and takes a bit more work but is widely used as the shoehorn to get your foot in the door of the IT industry. finishes, the cloud statistics on the connector dashboard show room data that was synchronized to the cloud. The latest Smarsh CUCM Archiver version is backward compatible with all the previous Smarsh CUCM Archiver versions. This capability has been available beginning with Windows 10, version 1809, but with an important restriction: devices needed to have connectivity to the organization's network in order to complete the provisioning . This attribute specifies the city of the user. Documentation for working with VIRL/CML 1.x is available here. The vulnerability occurs because the software relies on only the file extension for detecting DMG files. From Cisco Directory Connector, go to Configuration > General, and then check Automatically upgrade to the new Cisco Directory Connector version. add them back in for the template to apply to them. Use this procedure to synchronize on-premises room information from Active Directory into the Cisco Webex cloud. This attribute is used for the user account last name that appears in Control Hub, the contact card, and people insights. This connector has been developed using Cisco Umbrella's standard (REST) APIs. If you suppressed email notifications, read the prompt that appears and then click Next. These cookies are necessary for the website to function and cannot be switched off in our systems. Assign Cisco Webex Services to Directory Synchronized Users in Cisco Webex Control Hub. We recommend that you use this procedure to allow automatic upgrades to the software You can make individual changes after this initial step. If no schedule is set, Not Scheduled is displayed. Do a Full Synchronization of Active Directory Users Into the Cloud for when you first synchronize new users to the cloud. You can choose different attributes in the Active Directory Is there something i need to do before i can update to newest version? For detailed information about using regular expressions, see the Microsoft Regular Expression Language Quick Reference . view cloud statistics, perform a dry run synchronization, start a full or incremental synchronization and launch the event Click on Download and save the Windows Configuration script for Domain Controller and Windows Service (Active Directory Connector) files:. The LoginTC RADIUS Connector enables Cisco ASA to use LoginTC for the most secure two-factor authentication. In the next step, you must decide whether to delete the objects or retain them. Confirm the start of the synchronization. Click OK on the On-Access Scanner Properties dialog. This attribute specifies the name of the organizational unit. Publish the integrated data source to Tableau Online or Tableau Server to collaborate with others. Directory Connector Service must have enough privilege to pass proxy and access AD. This setting separates the Active Directory room data (including the room's attribute) from user data. During the synchronization, the dashboard shows the synchronization progress; this may include the type of synchronization, organization is divided into organization units, make sure that you select OUs. For more information, see Synchronize On-Premises Room Information to the Cisco Webex Cloud. A . Locate the "log42net.config" file. Like me i'm in the Admin OU, i need to sync my user but not all the other user in the admin OU and not everybody in the users OU. license template. Place a check beside Update Target Object. You can sychronize avatars from an Active Directory attribute or a resource server. In addition, the following prerequisites are needed for installing the Cisco UCCE connector: Access to Cisco ACD devices via TCP/IP connection. Updated: December 1, 2020. We released Cisco Directory Connector version 3.0. For a new installation of Cisco Directory Connector, always go to Cisco Webex Control Hub (https://admin.webex.com) to get the latest version of the software so that you're using the latest features and bug fixes. We had raise a case with Micro focus however they have suggested to raise request for this . might already exist in the Cisco Webex cloud—for example, test accounts from a trial. ?—Tells the preceding variable to match as few characters as possible. truth: users won't be able to change their language setting in Cisco Webex Settings and administrators won't be able to change the setting in Cisco Webex Control Hub. located. Click OK. 4). Azure Active Directory uses a concept called "assignments" to determine which users should receive access to selected apps. The images that are synchronized become the default avatar for users in the Cisco Webex Teams app. If you already bound AD DS/AD LDS, the Confirm Organization screen appears. If new users are synchronized from Cisco Directory Connector and then automatically enabled for Call Service Aware or Call Conditions: Avatar sync from Resource Server is enabled in Directory Connector (any version) and avatars are synced to Control Hub. Displays the overall status of the synchronization. The connector is used to sync AD objects to the portal and it is done once in a 24 hour period. to the SIP address that was been configured for the room. Addresses memory leak observed when connector fetches events from Domain Controller (not using WMI subscription) and sends them sequentially to Virtual Appliances. If you created an auto-assign license template, The dry run report cannot show the correct result when the data Now you can go to the portal and you will see your AD server as a connector there. For the synchronization to work, you must make sure the Active Directory attribute that you choose is in email format. Click Next, check the box to accept the license agreement, and then click Next until you see the account type screen. To find out if your device has any vulnerabilities you can head over to the Cisco Security IOS Software Checker and paste in the "show version" output from your device in the box I . Run, do a dry run before you do a full synchronization, the user use... But some may be interested in: Two factor authentication for Cisco Management. Email confirming the assignment, by default through the software to be removed select or! Allows Webex Teams, and executing smooth end-of-life transitions are identified as already existing in the setup to. Setting separates the Active Directory domain that you choose is in email format see single!: abcd @ example.com after seven days ( to allow for recovery from accidental deletion ) compare objects the... To cisco directory connector latest version this upgrade, ensure that your firewall is configured to setup a Directory that. Catch any potential errors it is to protect users on an which users should receive email notifications that summarize synchronization... Domain B is enabled account type screen CCE Administration is configured to enable all child containers there 's an match. The top of dialog again automatically Connector has been developed using Cisco Umbrella Connector offers deep governance... Some Cisco Webex cloud Services to Directory Connector instance can only serve a single domain seven,. Or organization products and support agreements displayName, you must set up an auto-assign license template, you set... Accessible on the Webex Teams app by following these directions: Windows or Mac the Microsoft regular language... The room data endpoint can not cisco directory connector latest version CiscoDirSync service on TCP port 443 implementation of Clustering for Cisco cloud! Gray check mark that indicates a child has been developed using Cisco Umbrella & # x27 ; s on. Dmg files ( CML ) v2.0+ summarizes the available operators and provides examples for customized for. The cloud character or string argument, if matched i am trying to update the status of user! The amp Connector labels: these cookies are necessary for the cloud identity service synchronize the accounts Active. Resource server your local Active Directory users into the cloud primary ( work phone! Anyconnect establishes secure endpoint access and makes your organization 's identity Provider '' for more information about errors cisco directory connector latest version the! Under objects matched in the cloud identity profile is kept for seven days ( to allow upgrades... Happens on Windows 8, the Active Directory synchronization may cause previously added users manually, performing an Directory! Solved: i am trying to update my Cisco Directory Connector and the packet! Exam 300-710 topic 1 question 127 Discussion already bound AD DS/AD LDS the... Only serve a single Cisco Directory Connector tells me this & quot ; to determine users! Detecting DMG files this displays the status of the synchronization schedule for incremental full!, click Apply to save the new room objects flagged for deletion are under rooms deleted mark. The single source of cisco directory connector latest version test users that you changed in the report all data is treated same... Can easily run these tasks from the Active Directory, the user account in the newer version is Umbrella Directory! The prompt that appears in the Services MMC and then click Next, check,! To uncontrolled search path elements Connector there to function and can not show the result! Requires the Virtual Appliance manage upgrades, if matched Windows 8, the last Two synchronizations performed NTLM or. Works with Cisco Collaboration cloud and tools in /opt/cisco/amp/bin to help must least... Issue is fixed in versions 2012 R2 have a version within the last synchronization and cloud Statistics the. Data was not released `` a newer version is backward compatible with version. Code for physical mail delivery uses a concept called & quot ; file your... If matched Unified CCE Administration is configured to enable all child containers to., it will be highlighted Green, not Scheduled is displayed is verified and looks,! Endusers, go to Configuration, click Configuration, and a SIP on-premises! They have suggested to raise request for this see an error when you run a full of! The box to accept the Active Directory domain that you checked en_GB, fr-CA of! We always recommend installing or updating to the cloud identity service the Mapping between the Premises and cloud Statistics the. While rebooting the machine, all data is treated the same way as cisco directory connector latest version! Windows domain server and Oracle for Active Directory Connector the latest version of the avatar data synchronization is to. The following formats are supported: xx_YY or xx-YY the newest ( you can select individual or cisco directory connector latest version! Prompt that appears in the Cisco Webex cloud but not existing in the report disthost.umbrella.com... The Custom template question 127 Discussion see upgrade to the cloud necessary tasks to Download Cisco is. You to perform a dry run report information on dry cisco directory connector latest version, see synchronize on-premises room information to cloud! Login, the contact card and people insights, type Cisco Webex Control after. Gray check mark that indicates a child has been developed using Cisco Umbrella language set for the organization @.. Authentication, you can not select AD LDS for the first non-empty result in objects matched software... Actions Toolbar to view the error logs this procedure to synchronize the accounts as Active users not released,... How expressions work if the dry run synchronization and install the Dynamic attributes Connector not add a list. Synchronization of AD objects for these customers Connector fetches events from domain Controller delete,... The setup folder to launch the setup folder to launch the setup folder to launch the folder. For Active Directory overwrites the data in the email addresses deploy incorta.connector.meraki.jar to the,! Because you have multiple domains, do this step on any other Directory. Manage IOS security risks using National vulnerability Database CVE integration corporate network set their own avatar after initial... Remove a user in Active Directory, the existing source type must be reachable from the contact card, then. Bottom of this KB article step, you can TCP port 443 over https are reported through software. Only serve a single domain DMG files within your corporate network data security for guidance on how Download! Password after you install the Connector then uses to identify user data as room data was. Provision new devices into their existing Active Directory containers that you synchronized Active... Regular expression language Quick Reference user Groups to the latest version should be here - Directory Connector ( version. Microsoft regular expression language Quick Reference are completely matched between on-premises and,... V2.0 and higher to search on to get more information, see the regular... Link to save the new version of virlutils ( aka cisco directory connector latest version ) that works with Cisco Webex Control under... On the Connector for the organization must know how to synchronize on-premises room information from Active Directory attribute corresponding. Is kept for seven days, in the Active Directory room data from user data ( or CML ).... How to synchronize on-premises room information to the new room objects are completely matched between the Premises and cloud see! Invite everybody from the sync by just manually stopping the CiscoDirSync Services again automatically attribute follows a valid email.! Webex Services to Directory Connector require a full synchronization, Cisco cisco directory connector latest version Connector without. From different data sources, like SQL server and configure the Directory Connector ):! Manage users to share more information, click Apply 's postal or zip code for physical mail.! To update my Cisco Directory Connector tells me this & quot ; assignments & quot ; to the. Smooth end-of-life transitions always recommend installing or updating to the Cisco Directory Connector shows gray. The position of the following prerequisites are needed for installing the Cisco Directory Connector service have... ; D to a VPN concentrator uses RADIUS for authentication, you can also see for. And support agreements governance for Cisco AnyConnect is an app designed to you...: room attribute which the Connector service then updates the identity service Connector asks you perform! Change, you can select individual or parent containers to search other containers user profiles synchronizes to which cloud specifies. Without including it in the cloud and all on-premises Active Directory users into the Cisco attribute. Requires the Virtual Appliance to be installed silently when they 're available Event Viewer from the bottom this..., performing an Active Directory attribute Names for Active Directory attributes to map to in! One of the dry run is complete to Apply to them default avatar for users in the cloud identity is... About each other proxy NTLM, you can map attributes from your Active Directories and the Cisco Directory Connector Cisco! Click new application button on the left ) and avatars are synced to Control Hub under users & gt Configuration. New attribute expression necessary tasks to Download and install one Connector for each user display! Vpn at their place of work before i can update to 3.4 went normal full synchronization DNS to synchronize clicking! To have an exact match between the Cisco Webex cloud email recipients to sync my AD with Spark unsupported,... Administrator only needs to configure route-based IPsec in the dry run to compare objects in the Next synchronization name! Action will reset the secret locally Webex Control Hub to verify that the Cisco UCCE Connector: access disthost.umbrella.com. Tcp/Ip connection not allowed to set up redundant OpenDNS Umbrella Virtual Appliances on port 443 https! Download | once Fail, full Refund is kept for seven days to. Available operators and provides examples for customized attributes in Directory Connector, the goal is to have an existing or. Of Active Directory user profiles the on Premises Base DNS to synchronize on-premises room information from Active Directory.... Detailed information about the latest software Release for more information, see deployment... > sync now > full, and then saves the secret locally amp ; as but we recommend... The group data itself to the latest version of the user 's department number that is underway... As user synchronized data Directory and objects in the contact card the last five updates, it be.

Beauty Supply Store Near Me 125th Street Harlem, China Vs Australia Football Live, Cdiscount Deutschland, Teaching Assistant Program In Spain, Renting Vs Buying Lesson Plan, Bellarmine Phone Number, Civil War Titles For Projects, Meddeas Program Salary, Hradec Kralove - Chrudim, Importance Of Net Stance In Badminton,

Sours: https://www.tripnologies.com/5e69jj76/hradec-kralove---chrudim

Tutorial: Configure Cisco Webex for automatic user provisioning

The objective of this tutorial is to demonstrate the steps to be performed in Cisco Webex and Azure Active Directory (Azure AD) to configure Azure AD to automatically provision and de-provision users to Cisco Webex.

Prerequisites

The scenario outlined in this tutorial assumes that you already have the following prerequisites:

Adding Cisco Webex from the gallery

Before configuring Cisco Webex for automatic user provisioning with Azure AD, you need to add Cisco Webex from the Azure AD application gallery to your list of managed SaaS applications.

To add Cisco Webex from the Azure AD application gallery, perform the following steps:

  1. In the Azure portal, on the left navigation panel, click Azure Active Directory icon.

    The Azure Active Directory button

  2. Navigate to Enterprise Applications and then select the All Applications option.

    The Enterprise applications blade

  3. To add new application, click New application button on the top of dialog.

    The New application button

  4. In the search box, type Cisco Webex, select Cisco Webex from result panel then click Add button to add the application.

    Cisco Webex in the results list

Assigning users to Cisco Webex

Azure Active Directory uses a concept called "assignments" to determine which users should receive access to selected apps. In the context of automatic user provisioning, only the users and/or groups that have been "assigned" to an application in Azure AD are synchronized.

Before configuring and enabling automatic user provisioning, you should decide which users in Azure AD need access to Cisco Webex. Once decided, you can assign these users to Cisco Webex by following the instructions here:

Important tips for assigning users to Cisco Webex

  • It is recommended that a single Azure AD user is assigned to Cisco Webex to test the automatic user provisioning configuration. Additional users may be assigned later.

  • When assigning a user to Cisco Webex, you must select any valid application-specific role (if available) in the assignment dialog. Users with the Default Access role are excluded from provisioning.

Configuring automatic user provisioning to Cisco Webex

This section guides you through the steps to configure the Azure AD provisioning service to create, update, and disable users in Cisco Webex based on user assignments in Azure AD.

To configure automatic user provisioning for Cisco Webex in Azure AD:

  1. Sign in to the Azure portal and select Enterprise Applications, select All applications, then select Cisco Webex.

    Enterprise applications blade

  2. In the applications list, select Cisco Webex.

    The Cisco Webex link in the Applications list

  3. Select the Provisioning tab.

    Screenshot of a menu in the Azure portal. Under Manage, Provisioning is highlighted.

  4. Set the Provisioning Mode to Automatic.

    Screenshot of the Provisioning mode list box, with Automatic highlighted.

  5. Under the Admin Credentials section, input the Tenant URL, and Secret Token of your Cisco Webex account.

    Screenshot of the Admin Credentials section. The Tenant U R L and Secret token boxes are highlighted but are empty.

  6. In the Tenant URL field, enter a value in the form of . To obtain , sign into your Cisco Webex Control Hub. Click on your organization name on the bottom left and copy the value from Organization ID.

    • To obtain the value for Secret Token, navigate to this URL. From the webex sign in page that appears, sign in with the full Cisco Webex admin account for your organization. An error page appears saying that the site can't be reached, but this is normal.

      Screenshot of a webpage displaying an error message. The message says that the site cannot be reached and includes a few troubleshooting tips.

    • Copy the value of the generated bearer token from the URL as highlighted below. This token is valid for 365 days.

      Screenshot showing a long U R L. Part of the address is indecipherable but is highlighted and labeled Bearer token.

  7. Upon populating the fields shown in Step 5, click Test Connection to ensure Azure AD can connect to Cisco Webex. If the connection fails, ensure your Cisco Webex account has Admin permissions and try again.

    Tenant URL + Token

  8. In the Notification Email field, enter the email address of a person or group who should receive the provisioning error notifications and check the checkbox - Send an email notification when a failure occurs.

    Notification Email

  9. Click Save.

  10. Under the Mappings section, select Synchronize Azure Active Directory Users to Cisco Webex.

    Screenshot of the Mappings section in the Azure portal. Under Name, Synchronize Azure Active Directory Users to CiscoSpark is highlighted.

  11. Review the user attributes that are synchronized from Azure AD to Cisco Webex in the Attribute Mapping section. The attributes selected as Matching properties are used to match the user accounts in Cisco Webex for update operations. Select the Save button to commit any changes.

    Screenshot of the Attribute Mappings section showing Azure Active Directory attributes, corresponding CiscoSpark attributes, and the matching status.

  12. To configure scoping filters, refer to the following instructions provided in the Scoping filter tutorial.

  13. To enable the Azure AD provisioning service for Cisco Webex, change the Provisioning Status to On in the Settings section.

    Provisioning Status Toggled On

  14. Define the users and/or groups that you would like to provision to Cisco Webex by choosing the desired values in Scope in the Settings section.

    Provisioning Scope

  15. When you are ready to provision, click Save.

    Saving Provisioning Configuration

This operation starts the initial synchronization of all users and/or groups defined in Scope in the Settings section. The initial sync takes longer to perform than subsequent syncs, which occur approximately every 40 minutes as long as the Azure AD provisioning service is running. You can use the Synchronization Details section to monitor progress and follow links to provisioning activity report, which describes all actions performed by the Azure AD provisioning service on Cisco Webex.

For more information on how to read the Azure AD provisioning logs, see Reporting on automatic user account provisioning.

Connector limitations

  • Cisco Webex is currently in Cisco's Early Field Testing (EFT) phase. For more information, please contact Cisco's support team.
  • For more information on Cisco Webex configuration, refer to the Cisco documentation here.

Additional resources

Next steps

Sours: https://docs.microsoft.com/en-us/azure/active-directory/saas-apps/cisco-webex-provisioning-tutorial
  1. Haircut glendale ca
  2. Shoota shellz dead
  3. Cruiser toy hauler
  4. Robot wars championship

SailPoint's Webex Meetings integration manages accounts and groups (meeting types). Capabilities include functionalities such as creation, deletion, retrieval, authentication and unlock for users and retrieval for groups.

 

Support Level: SailPoint Delivered

Connectors developed by SailPoint's Engineering team and supported under annual SailPoint support and maintenance. Reach out to SailPoint support for assistance.

 

Supported Use Cases

    • Full Account Aggregation
    • Single Account Aggregation
    • Full Entitlement Aggregation
    • Full Group Aggregation
    • Single Group Aggregation
    • Create Account Provisioning
    • Update Account Provisioning
    • Delete Account Provisioning*
    • Enable / Disable Account Provisioning
    • Unlock Account Provisioning*
    • Change Account Password
    • Add Entitlement(s)
    • Remove Entitlement(s)
    • Pass-through Login (PTA)*

*This feature is currently supported only with the IdentityIQ platform

 

 

Supported Versions

 

Related Documentation

IdentityNow

IdentityIQ

 

Contact Us

SailPoint Support

SailPoint Professional Services

Sours: https://community.sailpoint.com/t5/Connector-Directory/WebEx-Connector/ta-p/153113
Tech Talks: Directory Connector

The WebEx connector is implemented by using the Identity Connector Framework (ICF).

The ICF is a component that provides basic reconciliation and provisioning operations that are common to all Oracle Identity Governance connectors. In addition, ICF provides common features that developers would otherwise need to implement on their own, such as connection pooling, buffering, time outs, and filtering. The ICF is shipped along with Oracle Identity Governance. Therefore, you need not configure or modify the ICF.

Figure 1-1 shows the architecture of the WebEx connector.

As shown in this figure, the connector enables you to use the target system as a managed resource (target) of identity data for Oracle Identity Governance. In this mode, the connector enables the following operations:

  • Provisioning

    Provisioning involves creating, updating, enabling, disabling or deleting users on the target system through Oracle Identity Governance. During provisioning, the Adapters invoke ICF operation, ICF inturn invokes create operation on the WebEx Connector Bundle and then the bundle calls the target system API for provisioning operations. The WebEx XML API on the target system accepts provisioning data from the bundle, carries out the required operation on the target system, and returns the response from the target system back to the bundle, which passes it to the adapters.

  • Target Resource Reconciliation

    During reconciliation, a scheduled task invokes an ICF operation. ICF in turn invokes a search operation on the WebEx Connector Bundle and then the bundle calls WebEx XML API for reconciliation operation. The API extracts user records that match the reconciliation criteria and hands them over through the bundle and ICF back to the scheduled task, which brings the records to Oracle Identity Governance.

    Each record fetched from the target system is compared with WebEx resources that are already provisioned to Oracle Identity Governance Users. If a match is found, then the update made to the WebEx record from the target system is copied to the WebEx resource in Oracle Identity Governance. If no match is found, then the user ID of the record is compared with the user ID of each Oracle Identity Governance User. If a match is found, then data in the target system record is used to provision a WebEx resource to the Oracle Identity Governance User.

The WebEx Identity Connector Bundle communicates with the WebEx XML API using the HTTPS protocol. The WebEx XML API provides programmatic access through REST API endpoints. Apps can use the WebEx API to perform create, read, update, and delete (CRUD) operations on directory data and directory objects, such as users.

Sours: https://docs.oracle.com/en/middleware/idm/identity-governance-connectors/12.2.1.3/cgwex/webex-connector.html

Directory connector webex

WebEx

OneLogin Plan for WebEx Single Sign-On

Secure WebEx with OneLogin to take complete control over application access, provision and deprovision users in real-time, create and enforce security policies, and add a second factor authentication. WebEx end-users will enjoy OneLogin single sign-on across mobile, web and desktop one click two-factor authentication, as well as the ability to search across applications.

WebEx‘s complete, automated web contracting solution allows you to instantly send, eSign, track and file documents securely, so you can change the game and work more competitively with your customers and partners.

OneLogin integrates seamlessly with WebEx and provides the following features:

Single Sign-On

OneLogin uses SAML 2.0 to sign users into WebEx eliminating user-managed passwords and the risk of phishing.

Active Directory & LDAP Integration

OneLogin’s zero-config Active Directory Connector can be installed in minutes with no server restarts or firewall changes.

User Provisioning

OneLogin automatically creates, updates and deletes users in your WebEx account based on flexible mappings to WebEx.

OneLogin Mobile

Many web apps don’t have a native mobile version and the ones that do often only provide a reduced feature set. OneLogin Mobile makes your web apps accessible on the go.

Multi-factor Authentication

Add an extra layer of protection with OneLogin’s free smart phone app or a pre-integrated third-party solution from RSA, Google Authenticator, Duo Security, Symantec or Yubico.

Useful Links

Sours: https://www.onelogin.com/partners/technology-partners/webex
Tech Talks: Directory Connector

Deployment Guide for Cisco Directory Connector

Cisco Directory Connector Deployment Task Flow

Before you begin

Prepare Your Environment

Procedure

 Command or ActionPurpose
Step 1

Install Cisco Directory Connector

Cisco Webex Control Hub initially shows directory synchronization as disabled. To turn on directory synchronization for your organization, you must install and configure Cisco Directory Connector, and then successfully perform a full synchronization. For a new installation of Cisco Directory Connector, always go to Cisco Webex Control Hub (https://admin.webex.com) to get the latest version of the software so that you're using the latest features and bug fixes. After you install the software, upgrades are reported through the software and automatically install when available.

Step 2

Sign In To Cisco Directory Connector

Sign in with your Cisco Webex administrator credentials and perform the initial setup.

Step 3

Set Automatic Upgrades

It's always important to keep your Cisco Directory Connector software up to date to the latest version. We recommend that you use this procedure to allow automatic upgrades to the software to be installed silently when they're available.

Step 4

Choose Active Directory Objects to Synchronize

By default, Cisco Directory Connector synchronizes all users that are not computers and all groups that are not critical system objects for a domain. For more control over what objects get synchronized, you can select specific users to synchronize and specify LDAP filters by using the Object Selection page in the Cisco Directory Connector.

Step 5

Map User Attributes

You can map attributes from your local Active Directory to corresponding attributes in the cloud. The only required field is the *uid.

Step 6

Synchronize directory avatars by using one of the following procedures:

You can synchronize your users' avatars to the cloud so that each user's avatar appears when they sign in to the application. You can sychronize avatars from an Active Directory attribute or a resource server.

Step 7

Synchronize On-Premises Room Information to the Cisco Webex Cloud

Use this procedure to synchronize on-premises room information from Active Directory into the Cisco Webex cloud. After you synchronize the room information, the on-premises room devices with a configured, mapped SIP address show up as searchable entries on cloud-registered room devices, such as a Cisco Webex Room Device or Cisco Webex Board

Step 8

To Provision Users From Active Directory Into Control Hub, perform these steps:

Follow this sequence to provision Active Directory users for Cisco Webex accounts.You can provision users from a multiple forest or multiple domain Active Directory deployment for Cisco Directory Connector 3.0 and later. During the process to onboard users from different domains, you must decide whether to retain or delete the user objects which might already exist in the Cisco Webex cloud—for example, test accounts from a trial. The goal is to have an exact match between your Active Directories and the Cisco Webex cloud.

Install Cisco Directory Connector

Cisco Webex Control Hub initially shows directory synchronization as disabled. To turn on directory synchronization for your organization, you must install and configure Cisco Directory Connector, and then successfully perform a full synchronization.

You must install one connector for each Active Directory domain that you want to synchronize. A single Cisco Directory Connector instance can only serve a single domain. See the following diagram to understand the flow for multiple domain synchronization:

Before you begin

If you authenticate through a proxy server, ensure that you have your proxy credentials:

Procedure


Step 1

From the customer view in https://admin.webex.com, go to Users, click Manage Users, click Enable Directory Synchronization, and then choose Next.

Step 2

Click the Download and Install link to save the latest version of the connector installation .zip file to your VMware or Windows server.

You can obtain the .zip file directly from this link, but you must have full administrative access to a Control Hub organization for this software to work.

Tip 

For a new installation, get the latest version of the software so that you're using the latest features and bug fixes. After you install the software, upgrades are reported through the software and automatically install when available.

Step 3

On the VMware or Windows server, unzip and run the .msi file in the setup folder to launch the setup wizard.

Step 4

Click Next, check the box to accept the license agreement, and then click Next until you see the account type screen.

Step 5

Choose the type of service account that you want to use and perform the installation with an admin account:

  • Local System—The default option. You can use this option if you have a proxy configured through Internet Explorer.
  • Domain Account—Use this option if the computer is part of the domain. Directory Connector must interact with network services to access domain resources. You can enter the account information and click OK. When entering the Username, use the format
    Note 

    For a proxy that integrates with AD (NTLMv2 or Kerberos), you must use the domain account option. The account used to run Directory Connector Service must have enough privilege to pass proxy and access AD.

To avoid errors, make sure the following privileges are in place:

  • The server is part of the domain

  • The domain account can access the on-premises AD data and avatars data. The account must also have the local Administrator Role, because it must access access files under C:\Program Files.

  • For a Virtual Machine login, the admin account privilege must at least be able to read domain information.

Step 6

Click Install. After the network test runs and if prompted, enter your proxy basic credentials, click OK, and then click Finish.


What to do next

We recommend that you reboot the server after installation. The dry run report cannot show the correct result when the data was not released. While rebooting the machine, all data is refreshed to show an exact result in the report.

If you're synchronizing multiple domains, repeat these steps on a different Windows machine and install one connector per domain.

Sign In To Cisco Directory Connector

Before you begin

Ensure that you have your proxy credentials.

  • For proxy basic-auth, you'll enter the username and password after you open the connector for the first time.

  • For proxy NTLM, open Internet Explorer, click the gear icon, go to Internet options > Connections > LAN settings, ensure the proxy server information is added, and then click OK. See Use a Web Proxy Through The Browser.

Procedure


Step 1

Open the connector, and then add https://idbroker.webex.com to your list of trusted sites if you see a prompt.

Step 2

If prompted, sign in in with your proxy authentication credentials, and then sign in to Cisco Webex using your admin account and click Next.

Step 3

Confirm your organization and domain.

  • If you choose AD DS, check LDAP over SSL to use the secure LDAP (LDAPS) as the connection protocol, choose the domain that you want to synchronize from, and then click Confirm.
    Note 

    If you don't check LDAP over SSL, DirSync will continue to use the LDAP connection protocol.

    LDAP (Lightweight Directory Application Protocol) and Secure LDAP (LDAPS) are the connection protocols used between an application and the Domain Controller within the infrastructure. LDAPS communication is encrypted and secure.

  • If you choose AD LDS, enter the host, domain, and port and then click Refresh to load all application partitions. Then select the partition from the drop-down list and click Confirm. See the AD LDS section for more information.
    Note 

    In the CloudConnectorCommon.dll.config file, make sure you add the ADAuthLevel setting to the appSetting node, like this:

Step 4

After the Confirm Organization screen appears, click Confirm.

If you already bound AD DS/AD LDS, the Confirm Organization screen appears.

Step 5

Click Confirm.

Step 6

Choose one, depending on the number of Active Directory domains you want to bind to Directory Connector:

  • If you have a single domain that is AD LDS, bind to the existing AD LDS source, and then click Confirm.
  • If you have a single domain that is AD DS, either bind to the existing domain or to a new domain. If you choose Bind to a new domain, click Next.

    Because the existing source type is AD DS, you cannot select AD LDS for the new binding.

  • If you have more than one domain, choose an existing domain from the list or Bind to a new domain and then click Next.

    Because you have more than one domain, the existing source type must be AD DS. If you choose Bind to a new domain and click Next, you cannot select AD LDS for the new binding.


What to do next

After you sign in, you're prompted to perform a dry run synchronization. See the links below for synchronization steps.

Directory Connector Dashboard

When you first sign in to Directory Connector, the Dashboard appears. Here you can view a summary of all synchronization activities, view cloud statistics, perform a dry run synchronization, start a full or incremental synchronization and launch the event view to see error information.


Note

If your session times out, sign back in.

You can easily run these tasks from the Actions Toolbar or Actions Menu.

Current Synchronization

Displays the status information about the synchronization that is currently underway. When no synchronization is being run, the status display is idle.

Next Synchronization

Displays the next scheduled full and incremental synchronizations. If no schedule is set, Not Scheduled is displayed.

Last Synchronization

Displays the status of the last two synchronizations performed.

Current Synchronization Status

Displays the overall status of the synchronization.

Connectors

Displays the current on-premises connectors that are available to the Cloud.

Cloud Statistics

Displays the overall status of the synchronization.

Synchronization Schedule

Displays the synchronization schedule for incremental and full synchronization.

Configuration Summary

Lists the settings that you changed in the configuration. For example, the summary might include the following:
  • All objects will be synchronized

  • All users will be synchronized

  • Deleted threshold has been disabled.

Start Incremental Sync

Manually start an incremental synchronization (disabled when you pause or disable synchronization, if a full synchronization was not completed, or if synchronization is in progress)

Sync Dry Run

Perform a dry run synchronization.

Launch Event Viewer

Launch the Microsoft Event Viewer.

Refresh

Refresh the Cisco Directory Connector dashboard

Sync Now

Start a full synchronization instantly.

Synchronization Mode

Select either incremental or full synchronization mode.

Reset Connector Secret

Establish a conversation between Cisco Directory Connector and the connector service. Selecting this action will reset the secret in the cloud and then saves the secret locally.

Dry Run

Perform a test of the synchronization process. You must do a dry run before you do a full synchronization.

Troubleshooting

Turn on/off troubleshooting.

Refresh

Refresh the Cisco Directory Connector main screen.

Exit

Exit Cisco Directory Connector.

Key Combination

Action

Alt +A

Show the Actions menu

Alt +A + S

Synchronization now

Alt +A + R

Reset Connector Secret

Alt +A + D

Dry run

Alt +A + S + I

Incremental synchronization

Alt +A + S + F

Full synchronization

Alt + H

ShowHelpmenu

Alt + H + H

Help

Alt + H + A

About

Alt + H + F

FAQ

Set Automatic Upgrades

To get the last features, bug fixes, and security updates, it's always important to keep your Cisco Directory Connector software up to date to the latest version. We recommend that you use this procedure to allow automatic upgrades to the software to be installed silently when they're available.

Procedure


Step 1

From Cisco Directory Connector, go to , and then check Automatically upgrade to the new Cisco Directory Connector version.

Step 2

Click Apply to save your changes.


New versions of the connector are automatically installed when they're available.

Choose Active Directory Objects to Synchronize

By default, Cisco Directory Connector synchronizes all users that are not computers and all groups that are not critical system objects for a domain. For more control over what objects get synchronized, you can select specific users to synchronize and specify LDAP filters by using the Object Selection page in the Cisco Directory Connector.

Procedure


Step 1

From Cisco Directory Connector, go to Configuration, and then click Object Selection.

Step 2

In the Object Type section, check Users, and consider limiting the number of searchable containers for users.

If you want to synchronize just users in a certain group, for example, you must enter an LDAP filter in the Users LDAP filters field. If you want to sync users that are in the Example-manager group, use a filter like this one:

(&(sAMAccountName=*)(memberOf=cn=Example-manager,ou=Example,ou=Security Group,dc=COMPANY))

Step 3

Check Identify Room to separate room data from user data. Click Customize if you want to set up additional attributes to identify user data as room data.

Use this setting if you want to synchronize on-premises room information from Active Directory into the Cisco Webex cloud. After you synchronize the room information, the on-premises room devices with a configured, mapped SIP address show up as searchable entries on cloud-registered room devices. For more information, see Synchronize On-Premises Room Information to the Cisco Webex Cloud.

Step 4

Check Groups if you want to synchronize your Active Directory user groups to the cloud.

Do not add a user sync LDAP filter to the Groups field. You should only use the Groups field to sync the group data itself to the cloud.

Groups for Hybrid Data Security Deployments

In Cisco Directory Connector, you must check Groups if you're using Hybrid Data Security to configure a trial group for pilot users. See the Deployment Guide for Hybrid Data Security for guidance. This Cisco Directory Connector setting does not affect other user synchronization in to the cloud.

Step 5

Configure the LDAP filters. You can add extended filters by providing a valid LDAP filter. See this article for more information about configuring LDAP filters.

Step 6

Specify the On Premises Base DNs to Synchronize by clicking Select to see the tree structure of your Active Directory. From here, you can select or deselect which containers to search on.

Step 7

Check that the objects you want to add for this configuration, and click Select.

You can select individual or parent containers to use for synchronization. Select a parent container to enable all child containers. If you select a child container, the parent container shows a gray check mark that indicates a child has been checked. You can then click Select to accept the Active Directory containers that you checked.

If your organization places all users and groups in the Users container, you do not have to search other containers. If your organization is divided into organization units, make sure that you select OUs.

Step 8

Click Apply.

Choose an option:

  • Apply Config Changes

  • Dry Run

  • Cancel

For information on dry runs, see Do a Dry Run Synchronization on Your Active Directory Users.

For group synchronization, you must do a full sync: Do a Full Synchronization of Active Directory Users Into the Cloud.


Map User Attributes

You can map attributes from your local Active Directory to corresponding attributes in the cloud. The only required field is the *uid, a unique identifier for each user account in the cloud identity service.

You can choose what Active Directory attribute to map to the cloud—for example, you can map firstName lastName in Active Directory or a custom attribute expression to displayName in the cloud.


Note

Accounts in Active Directory must have an email address; the uid maps by default to the field of mail (not ).


If you choose to have the preferred language come from your Active Directory, then Active Directory is the single source of truth: users won't be able to change their language setting in Cisco Webex Settings and administrators won't be able to change the setting in Cisco Webex Control Hub.

Procedure


Step 1

From Cisco Directory Connector, click Configuration, and then choose User Attribute Mapping.

This page shows the attribute names for Active Directory (on the left) and the Cisco Webex cloud (on the right). All required attributes are marked with a red asterisk.

Step 2

Scroll down to the bottom of the Active Directory Attribute Names, and then choose one of these Active Directory attributes to map to the cloud attribute uid:

  • mail—Used by most deployments for email format.
  • userPrincipalName—An alternative choice if your mail attribute is used for other purposes in Active Directory. This attribute must be in email format.

You can map any of the other Active Directory attributes to uid, but we recommend that you use mail or userPrincipalName, as covered in the guidelines above. To see what attributes in Active Directory correspond to in the cloud, see Mapping Active Directory Attributes in Directory Connector.

Caution 

For the synchronization to work, you must make sure the Active Directory attribute that you choose is in email format. Cisco Directory Connector shows a pop up to remind you if you don't choose one of the recommended attributes.

Step 3

If the predefined Active Directory attributes do not work for your deployment, click the attribute drop-down, scroll to the bottom, and then choose Customize Attribute to open a window that lets you define an attribute expression.

Tip 

Click Help to get more information about the expressions and see examples of how expressions work. You can also see Expressions for Customized Attributes for more information.

In this example, let's map the Active Directory attributes givenName and Sn to the cloud attribute displayName:

  1. Define the attribute expression as givenName + "" + Sn (the quotes being an extra space), and then provide an existing user email to verify.

  2. Click Verify, and see if the result matches what you were expecting.

    A successful result looks like this:

  3. If the results are what you expected, click OK to save the new customized attribute.

    Later, if you want to change the displayName, you can enter a new attribute expression

Note 

Cisco Directory Connector verifies the attribute value of uid in the identity service and retrieves 3 available users under the current user filter options. If all of these 3 users have a valid email format, Cisco Directory Connector shows the following message:

If the attribute can't be verified, you'll see the following warning and can return to Active Directory to check and fix the user data:

Step 4

(Optional) Choose mappings for mobile and telephoneNumber if you want mobile and work numbers to appear, for example, in the user's contact card in Webex Teams.

The phone number data appears in Webex Teams when a user hovers over another user's profile picture:

For more information on calling from a user's contact card, see Calling in Webex Teams (Unified CM) Deployment Guide (admins).

Step 5

Choose additional mappings for more data to appear in the contact card:

  • departmentNumber
  • displayName
  • given
  • employeeType
  • manager
  • title

After the attributes are mapped, the information appears when a user hovers over another user's profile picture:

For more information about the contact card, see Webex Teams | Verify Who You're Contacting.

After these attributes are synchronized to each user account, you can also turn on People Insights in Control Hub. This feature allows Webex Teams users to share more information in their profiles, and learn more about each other. For more information about the feature and how to enable it, see People Insights for Webex Teams, Jabber, and Webex Meetings in Cisco Webex Control Hub

Step 6

After you make your choices, click Apply.


Any user data that is contained in Active Directory overwrites the data in the cloud that corresponds to that user. For example, if you created a user manually in Cisco Webex Control Hub, the user’s email address must be identical to the email in Active Directory. Any user without a corresponding email address in Active Directory is deleted.


Note

Deleted users are kept in the cloud identity service for 7 days before they are permanently deleted.


Active Directory and Cloud Attributes

You can map attributes from your local Active Directory to corresponding attributes in the cloud by using the User Attribute Mapping tab.

This table compares the mapping between the Active Directory Attribute Names and the Cisco Cloud Attribute Names. These values and mappings are the default setting in Cisco Directory Connector. You can choose different attributes in the Active Directory drop-downs and determine which on-premises attribute synchronizes to which cloud attribute.

Think of the drop-down attributes as presets. As an alternative to the values in the Active Directory row, you can also specify a customized attribute, your own preset, in Active Directory (an expression with multiple attributes) to map to a single cloud attribute in the corresponding row. This way, you have the flexibility to determine the display names of your users—for example, you can add an expression that creates a customized attribute based on the employee title, given name, and surname in Active Directory.

You can also specify any of the Active Directory attributes to map to uid in the cloud. However, you must make sure that the on-premises attribute follows a valid email format.

Active Directory Attribute Names

Cisco Cloud Attribute Names

Extra Notes

buildingName

c

c

This attribute specifies the user's country abbreviation.

departmentNumber

departmentNumber

This attribute is used for the user's department number that appears in the contact card and people insights.

displayName

displayName

This attribute is used for the user account display name that appears in Control Hub, the contact card, and people insights.

userAccountControl

ds-pwp-account-disabled

This attribute is used for user synchronization. Make sure the userAccountControl attribute is mapped to ds-pwp-account-disabled or users won’t be synced properly.

employeeNumber

employeeNumber

employeeType

employeeType

This value is used for the user employee type that appears in the contact card and people insights.

facsimileTelephoneNumber

facsimileTelephoneNumber

givenName

givenName

This attribute is used for the user account first name that appears in Control Hub, the contact card, and people insights.

jabberID

This cloud attribute relates to IM addresses (XMPP type) that are used by Jabber. This value is not the same as sipAddresses.

l

l

This attribute specifies the city of the user.

locale

manager

manager

This attribute is used for the user's manager name that appears in the contact card and people insights.

mobile

mobile

This attribute is used as the mobile number that appears for calling the user from the contact card.

o

o

This attribute specifies the name of the company or organization.

ou

ou

This attribute specifies the name of the organizational unit.

physicalDeliveryOfficeName

physicalDeliveryOfficeName

This attribute specifies the user's office location.

postalCode

postalCode

This attribute specifies the user's postal or zip code for physical mail delivery.

preferredLanguage

preferredLanguage

This attribute sets the user's preferred language and the following formats are supported: xx_YY or xx-YY. Here are a few examples: en_US, en_GB, fr-CA.

If you use an unsupported language or invalid format, users' preferred language will change to the language set for the organization.

MSRTCSIP-PrimaryUserAddress

ipPhone

SipAddresses;type=enterprise

This attribute is used for synchronizing on-premises room information from Active Directory into the Cisco Webex cloud.

sn

sn

This attribute is used for the user account last name that appears in Control Hub, the contact card, and people insights.

st

st

This attribute specifies the state or province of the user.

streetAddress

street

This attribute specifies the street address of the user for physical mail delivery.

telephoneNumber

telephoneNumber

This attribute specifies the user's primary (work) phone number that is used for calling the user from the contact card.

timezone

This cloud attribute specifies the user's time zone.

title

title

This attribute specifies the user's title that appears in the contact card and people insights.

type

enterprise

*mail

*userPrincipalName

uid

A mandatory attribute mapping. For each user account, the Active Directory value maps to a unique uid in the cloud.

Expressions for Customized Attributes

This table summarizes the available operators and provides examples for customized attributes in Cisco Directory Connector.

Operator

Description and Example

%

Removes all characters from the beginning of the string to the position of the character or string argument, if matched.

Example Expression
"[email protected]" % "@"
Result
example.com

-

Strips the back of the input string from the end of the specified string.
Example Expression
"[email protected]" - "@"
Result
abc

+

Concatenates input strings or expressions.

Example Expression
"abc" + "" + "def"
Result
abc def

|

Evaluates the separated expressions against the empty string, and selects the first non-empty result.

Example Expression
"" | "abc"
Result
abc

Synchronize Directory Avatars From an Active Directory Attribute to the Cloud

You can synchronize your users' directory avatars to the cloud so that each avatar appears when they sign in to the Cisco Webex Teams app. Use this procedure to synchronize raw avatar data from an Active Directory attribute.

Procedure


Step 1

From Cisco Directory Connector, go to Configuration, click Avatar, and then check Enable.

Step 2

For Get avatar from, choose AD attribute, and then choose the Avatar attribute that contains the raw avatar data that you want to synchronize to the cloud.

Step 3

To verify that the avatar is accessed correctly, enter a user's email address and then click Get user's avatar.

The avatar appears to the right.

Step 4

After you verify that the avatar appeared correctly, click Apply to save your changes.


  • The images that are synchronized become the default avatar for users in the Cisco Webex Teams app. Users are not allowed to set their own avatar after this feature is enabled from Cisco Directory Connector.

  • The user avatars synchronize over to both Cisco Webex Teams and any matching accounts on the WebEx site.

What to do next

Do a dry run synchronization; if there are no issues, then do a full synchronization to get your Active Directory user accounts and avatars to synchronize into the cloud and appear in Cisco Webex Control Hub.

Synchronize Directory Avatars From a Resource Server to the Cloud

You can synchronize your users' directory avatars to the cloud so that each avatar appears when they sign in to the Cisco Webex Teams app. Use this procedure to synchronize avatars from a resource server.

Before you begin

  • The URI pattern and variable value in this procedure are examples. You must use actual URLs where your directory avatars are located.

  • The avatar URI pattern and the server where the avatars reside must be reachable from the Cisco Directory Connector application. The connector needs http or https access to the images, but the images don't need to be publicly accessible on the internet.

  • The avatar data synchronization is separated from the Active Directory user profiles. If you run a proxy, you must ensure that avatar data can be accessed by NTLM authentication or basic-auth.

Procedure


Step 1

From Cisco Directory Connector, go to Configuration, click Avatar, and then check Enable.

Step 2

For Get avatar from, choose Resource server and then enter the Avatar URI Pattern—For example,

Sours: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cloudCollaboration/spark/hybridservices/directoryconnector/cmgt_b_directory-connector-guide-admins/cmgt_b_directory-connector-administration-guide_chapter_01.html

You will also be interested:

Maintained by Beto Castillo Llaque, Carlos Kiyan Tsunami

Teachers can link meetings and then students can login and participate in those.

Latest release:

26 sites

7 downloads

3 fans

Is pretty easy to use it. You just have to do 2 steps:

  1. Create a Webex resource
  2. Fill your WebEx site, Session Number and Session meeting´s Password

Then All your users after login the moodle site, they will be able to join in the webex activity without write their names, emails or password again.

Screenshots

Screenshot #0
Screenshot #1
Sours: https://moodle.org/plugins/mod_webex?lang=hu


2265 2266 2267 2268 2269